LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Cooling System >> Repair Instructions >> Transmission Fluid Cooler Pipe Replacement >> Installation Procedure

Installation Procedure

  1. Install transmission fluid cooler pipe (2).
    Fig 1: Transmission Fluid Cooler Pipe
    GM2537980Courtesy of GENERAL MOTORS COMPANY
  2. Connect transmission fluid cooler pipe (2) to transmission fluid auxiliary cooler and radiator. Install 2 retainers (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection (6T30-MH9 and 6T40-MH8)  and Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection (AF40-MDK) .
    CAUTION: Refer to Component Fastener Tightening Caution .
  3. Install the fluid level drain plug (1) and tighten to 12 N.m (106 lb in).
    Fig 2: Identifying Fluid Level Hole Plug
    GM1998836Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  4. Fill the transmission to a proper level with the correct fluid. Refer to Transmission Fluid Drain and Fill .
  5. Install front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals