LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Fluid Drain and Fill >> Filling Procedure

Filling Procedure

  1. Lower the vehicle.
  2. Remove the 4 engine control module nuts (1).
    Fig 1: Locating Engine Control Module Components
    GM2189268Courtesy of GENERAL MOTORS COMPANY
  3. Without disconnecting the electrical connector, remove the engine control module (3) and hang aside.
  4. Remove the transmission vent hose (2) and the fluid filler cap (1).
    Fig 2: Automatic Transmission Fluid Filler Cap, Fluid Level Plug & Cap Vent Hose
    GM2371617Courtesy of GENERAL MOTORS COMPANY
  5. Fill the transmission with the proper amount of the correct fluid. Refer to Transmission General Specifications (6T30) , Transmission General Specifications (6T40/6T45/6T50) , Approximate Fluid Capacities (6T40/45/50) and Approximate Fluid Capacities (6T30) .
  6. Install the fluid filler cap (1) and the transmission vent hose (2).
scientia non olet · About LEMON Manuals