LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

  1. Set the park brake and chock the wheels.
  2. Disconnect the transmission range selector lever cable (1) from the transmission manual shift lever pin and cable bracket.
    Fig 1: Automatic Transmission Control Lever Knob
    GM2373475Courtesy of GENERAL MOTORS COMPANY
  3. Remove the left instrument panel lower trim panel. Refer to Instrument Panel Lower Trim Panel Replacement - Left Side .
  4. Remove the instrument panel tie bar brace bolts (1).
    Fig 2: Instrument Panel Tie Bar Brace
    GM2538074Courtesy of GENERAL MOTORS COMPANY
  5. Remove the instrument panel tie bar brace (2).
  6. Remove the transmission range selector lever cable (1) from the cable bracket (3).
    Fig 3: Transmission Range Selector Lever Cable And Bracket
    GM2373479Courtesy of GENERAL MOTORS COMPANY
  7. Remove the cable end terminal from shifter pin (2).
  8. Remove the transmission range selector lever cable grommet (1) from the cowl panel.
    Fig 4: Automatic Transmission Range Selector Lever Cable Grommet
    GM2373480Courtesy of GENERAL MOTORS COMPANY
  9. Remove the transmission range selector lever cable from the vehicle.