LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Manual Shift Shaft and Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
  2. Remove the manual shaft seal (1) using DT-45201  seal remover.
    Fig 1: Cooler Line Seal Remover
    GM2079285Courtesy of GENERAL MOTORS COMPANY