LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the control valve body. Refer to Control Valve Body Replacement .
  2. Remove the input speed sensor bolt (2) M6 x 23.
    Fig 1: Identifying Input Speed Sensor Mounting Bolt
    GM1998841Courtesy of GENERAL MOTORS COMPANY
  3. Unlock the 2 retaining tabs inside the transmission housing.
  4. Remove the input speed sensor (3).
  5. Remove the 3 input speed sensor seals (1).
scientia non olet · About LEMON Manuals