LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the 3 input speed sensor seals (1).
    Fig 1: Identifying Input Speed Sensor Mounting Bolt
    GM1998841Courtesy of GENERAL MOTORS COMPANY
  2. Install the input speed sensor (3).
  3. Verify that the retaining tabs are locked completely.
  4. Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  5. Install the control valve body. Refer to Control Valve Body Replacement .
  6. Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn .
scientia non olet · About LEMON Manuals