LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Replacement >> Removal Procedure

Removal Procedure

  1. Set the park brake and chock the wheels.
  2. Remove the battery tray. Refer to Battery Tray Replacement .
  3. Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin.
    Fig 1: View Of Transmission Range Selector Lever & Cable Connection
    GM2001179Courtesy of GENERAL MOTORS COMPANY
  4. Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket.
  5. Remove the transmission range selector lever nut (1).
    Fig 2: View Of Transmission Range Selector Lever
    GM2001183Courtesy of GENERAL MOTORS COMPANY
    WARNING: Hold the transmission range selector lever while removing or installing the lever retaining nut. Excessive torque on the manual shaft can damage the detent lever hub retainer which could allow the vehicle to roll when placed in the park position.
  6. Remove the transmission range selector lever (2).
scientia non olet · About LEMON Manuals