Drive and Driven Sprocket, Drive Link and Park Pawl Removal (6T30)

Fig 1: Drive And Driven Sprocket, Drive Link and Park Pawl (6T30)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Drive Link Lube Scoop
2	Drive Link Lube Scoop Seals
3	Drive Link Lube Fluid Seal
4	Driven Sprocket Assembly, Drive Sprocket and Park Gear Assembly and Drive Link NOTE: The drive link, drive and driven sprocket assemblies must be removed at the same time. The driven sprocket ball bearing inner race has a slight interference fit with the case. Pull straight up to ease removal.
5	Driven Sprocket Bearing Assembly NOTE: The driven sprocket bearing may be stuck to the driven sprocket.
6	Baffle Retainer
7	Front Differential Carrier Baffle Bolts M6 x 16 (Qty: 2)
8	Front Differential Carrier Baffle
9	Park Pawl Shaft
10	Park Pawl Spring
11	Park Pawl