Control Solenoid Valve and Transmission Control Module Assembly Installation

Fig 1: Identifying Control Solenoid Valve & TCM Bolt Tightening Sequence

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Control Solenoid Valve Assembly Filter Plate CAUTION: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination. NOTE: Install a NEW filter plate to prevent fluid leaks past the fluid seals.
2	Control Solenoid (w/Body and TCM) Valve Assembly
3	Control Valve Body Bolt M5 x 40.5 (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten  7 N.m (62 lb in)
4	Control Valve Body Bolt M6 x 97 (Qty: 12) Tighten  10 N.m (89 lb in)