No Third, Fifth and Reverse Gear

Checks	Causes
3-5 Reverse Clutch Assembly	Inspect for damaged, stripped or sheared splines on 3-5 Reverse Clutch Plates (507-509), Backing Plate (510) Inspect for sheared or stripped splines on 3-5 Rev/4-5-6 Housing (516) to Turbine Shaft (517) Inspect for damage, improper surface finish, porosity, deformed or unbalanced 3-5 Rev/4-5-6 Housing (516) Inspect for damaged, worn, loose or seized hub bushing in the 3-5 Rev/4-5-6 Housing Inspect for broken, porous or improper surface finish or plugged oil passages of the 3-5 Rev/4-5-6 Housing (516) Inspect for failure of the Input Shaft Thrust Bearing (538) Inspect for disengaged or broken 3-5 Reverse Clutch Backing Plate (511) Inspect for damaged, worn or leaking 3-5 Reverse Clutch Piston Seals (504-506) Inspect for damaged or broken 3-5 Rev/4-5-6 Clutch Housing (516) Inspect for warped, damaged, improper surface finish or debonding 3-5 Reverse Clutch Piston (502) Inspect for broken or fatigued 3-5 Reverse Clutch Spring (503) Inspect for disengaged or broken Speed Sensor Reluctor Retainer (500) Inspect for worn, broken or damaged Speed Sensor Reluctor Wheel (501)
Reaction Sun Gear Assembly (566)	Inspect for stripped or sheared splines
Reaction Carrier (567)	Inspect for broken or disengaged Input Internal Gear Retainer Inspect for stripped or sheared splines on the Input Internal Gear
Output Carrier (574)	Inspect for stripped or sheared splines for the Reaction Internal Ring Gear
4-5-6 Clutch Assembly	Inspect for plugged or missing 4-5-6 Piston Dam Oil Feed hole Inspect for leaking 4-5-6 Piston Dam