Conditions for Running the DTC

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0716, P0717, P0722, P0723 or P182E is not set.
Ignition voltage is 9-32 V.
Throttle position signal is valid.
Engine speed is 400-7, 500 RPM for 5 s.
High side driver is enabled.
Transmission fluid temperature is -6.6°C (20°F) or greater.
Transmission output speed is 100 RPM or greater or the throttle position is 0.5% or greater.
DTC runs continuously when above conditions are met.