Conditions for Running the DTC

P0815 or P0816

• DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877 or P1915 is not set.
• Engine speed is 400-7, 500 RPM for 5 s.
• Ignition voltage is 9-32 V.
• Time since the last gear range change is 1 s or greater.
• DTC runs continuously when the above conditions are met.

P0826

• DTC P0826 or P1761 is not set.
• Engine speed is 400-7, 500 RPM for 5 s.
• Ignition voltage is 9-32 V.
• DTC runs continuously when the above conditions are met.