LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires And Wheels >> Repair Instructions >> Tire and Wheel Removal and Installation >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheel center cap.
    Fig 1: Wheel And Nuts
    GM2027825Courtesy of GENERAL MOTORS COMPANY
  3. Mark the relationship of the wheel (2) to the hub.
  4. Remove the wheel nuts (1).
  5. Remove the tire and wheel assembly (2) from the vehicle.
    WARNING: If penetrating oil gets on the vertical surfaces between the wheel and the rotor or drum it could cause the wheel to work loose as the vehicle is driven, resulting in loss of control and an injury accident.
    CAUTION: Removing the wheel may be difficult because of foreign materials or a tight fit between the wheel and the hub/rotor. Slightly tap the tire side wall with a rubber mallet in order to remove the wheel. Failure to follow these instructions may result in damage to the wheel.
scientia non olet · About LEMON Manuals