LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires And Wheels >> Repair Instructions >> Tire Valve Stem Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle on a suitable support. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire/wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation .
  3. Dismount the tire from the rim. Refer to Tire Dismounting and Mounting .
  4. Remove the TORX screw (1) from the tire pressure monitoring (TPM) sensor (2) and pull it straight off the tire pressure valve stem (3).
    Fig 1: View Of Tire Pressure Indicator Sensor
    GM1748887Courtesy of GENERAL MOTORS COMPANY
    NOTE: When servicing the tire valve always use a new TORX screw during installation.
  5. Remove the tire pressure valve stem by pulling it through the rim.
    CAUTION: Do not scratch or damage the clear coating on aluminum wheels with the tire changing equipment. Scratching the clear coating could cause the aluminum wheel to corrode and the clear coating to peel from the wheel.
scientia non olet · About LEMON Manuals