LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires And Wheels >> Repair Instructions >> Aluminum Wheel Refinishing >> General Refinishing Procedures - Installation

General Refinishing Procedures - Installation

  1. Unmask the wheels.
  2. Clean all wheel mounting surface of any corrosion, overspray or dirt.
  3. Install NEW coated balance weights at marked locations.
    NOTE: When re-balancing a tire on an aluminum wheel, coated balance weights must be used in order to reduce the chance of future cosmetic damage.
  4. Install wheels on vehicle.
    NOTE: Use a torque stick on an impact wrench or a torque wrench to consistently and uniformly fasten the wheel to the specified torque for the vehicle. The star pattern must be followed.
scientia non olet · About LEMON Manuals