Ride Diagnosis
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Suspension General Diagnosis |
| 2 |
IMPORTANT:
Verify the vehicle suspension package RPO. Verify that the ride is too soft or too hard.Does the vehicle ride normally? |
System OK | Go to Step 3 |
| 3 | Check the tire inflation and adjust to specifications. Refer to Vehicle Certification, Tire Placard, Anti-Theft and Service Parts ID Label
. Did you adjust the tire pressure? |
Go to Step 6 | Go to Step 4 |
| 4 | Inspect the vehicle trim height. Refer to Trim Height Inspection . Did you find and correct the condition? |
Go to Step 6 | Go to Step 5 |
| 5 | Inspect the following suspension components for wear or damage:
Did you find and correct the condition? |
Go to Step 6 | - |
| 6 | Drive the vehicle in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |