LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Flushing >> Reverse Flushing Setup

Reverse Flushing Setup

  1. Install both GE-45268-9  fitting O-ring onto GE-45268-10  adapter.
    NOTE:
    • Reverse flow refrigerant flush is recommended for desiccant bag failure. Replace condenser/receiver dehydrator assembly when A/C flush is complete and perform the following procedure:
    • Inspect and lubricate GE-45268  adapter kit fitting O-rings. Refer to Air Conditioning O-Ring Seal Replacement .
  2. Install GE-45268-8  fitting O-ring onto suction side of GE-45268-10  adapter.
  3. Install GE-45268-7  fitting O-ring onto discharge side of GE-45268-10  adapter.
scientia non olet · About LEMON Manuals