LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Air Conditioning Compressor Suction Screen Replacement >> Removal Procedure

Removal Procedure

  1. Remove the A/C compressor and condenser hose from the A/C compressor. Refer to Air Conditioning Compressor and Condenser Hose Replacement (2.0L Diesel LUZ) , Air Conditioning Compressor and Condenser Hose Replacement (1.4L LUV)  and Air Conditioning Compressor and Condenser Hose Replacement (1.8L LUW and LWE) .
    NOTE: Suction screens are intended to be installed in the suction hose after a major compressor failure.
  2. Using the GE-44551-9  Universal Removal Tool, place the tip of the tool under the inside edge of the compression band of the suction screen and the cushioning fulcrum pad against the open end of the manifold fitting.
    Fig 1: View Of Universal Removal Tool
    GM1846463Courtesy of GENERAL MOTORS COMPANY
  3. Pry upward on the band and move the tool around the diameter of the screen as necessary to remove the screen.
    NOTE: Do not damage the end of the hose or manifold.
scientia non olet · About LEMON Manuals