LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls And Fuel - 1.8L (LUW, LWE) - Repair Instructions) >> Repair Instructions >> Secondary Air Injection Check Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install a NEW secondary air injection check valve gasket (1).
    Fig 1: Secondary Air Injection Check Valve Bolts
    GM2781590Courtesy of GENERAL MOTORS COMPANY
  2. Install the secondary air injection check valve (2).
  3. Install the 3 secondary air injection check valve bolts (3) and tighten to 22 N.m (16 lb ft).
    CAUTION: Refer to Fastener Caution .
  4. Connect the secondary air injection pump pipe (1) to the secondary air injection check valve (2). Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 2: Secondary Air Injection Pump Pipe
    GM2834332Courtesy of GENERAL MOTORS COMPANY
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals