LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Repair Instructions - On Vehicle >> Oil Pressure Relief Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan. Refer to Oil Pan Replacement (Manual Transmission)  and Oil Pan Replacement (Automatic Transmission) .
  2. Remove the oil pressure relief valve closure bolt (1).
    Fig 1: Oil Pressure Relief Valve Assembly
    GM2028017Courtesy of GENERAL MOTORS COMPANY
  3. Remove the oil pressure relief valve assembly (2).
  4. Remove the piston (3) and the spring (4).
  5. Clean the parts.
    WARNING: Bodily injury may occur if the cleaning solvent is inhaled or exposed to the skin.
    WARNING: To avoid eye injury, use approved safety lenses, goggles or face shield when using buffing and cleaning equipment.
  6. Inspect the parts.
  7. Clean the thread.