LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  4. Release tension to the drive belt tensioner by rotating counterclockwise (1) and lock with EN 6349  pin (2).
    Fig 1: Drive Belt Tensioner And Locking Pin
    GM2189264Courtesy of GENERAL MOTORS COMPANY
  5. Remove the drive belt (1).
    Fig 2: Drive Belt
    GM2191162Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals