Exhaust Manifold Installation
WARNING: This page is about a different variant/trim than selected.
- Clean the exhaust manifold sealing surface.
- Install a NEW exhaust manifold gasket (1) to the cylinder head.
- Install the exhaust manifold (3) and tighten the NEW nuts (4) to 20 N.m (15 lb ft).CAUTION: Refer to Fastener Caution .CAUTION: Refer to Torque-to-Yield Fastener Caution .
- Install the 2 exhaust manifold bracket bolts (2) to 20 N.m (15 lb ft).