LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Removal

Crankshaft and Bearing Removal

WARNING: This page is about a different variant/trim than selected.
  1. Identify all the connecting rod bearing caps (1).
    Fig 1: Connecting Rod And Bearing Cap
    GM1948709Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 4 bolts.
    Fig 2: Connecting Rod Bearing Caps 1 And 4
    GM1937053Courtesy of GENERAL MOTORS COMPANY
  3. Remove the connecting rod bearing caps 1 and 4 (1).
  4. Turn the crankshaft through 180°.
  5. Remove the 4 bolts.
    Fig 3: Connecting Rod Bearing Caps 2 And 3
    GM1937048Courtesy of GENERAL MOTORS COMPANY
  6. Remove the connecting rod bearing caps 2 and 3 (1).
  7. Identify the crankshaft bearing caps.
  8. Remove the crankshaft bearing caps (1).
    Fig 4: View Of Crankshaft Bearing Cap Bolts
    GM1937120Courtesy of GENERAL MOTORS COMPANY
  9. Remove the 10 bolts.
  10. Remove the crankshaft (2).
  11. Remove the crankshaft bearing clips.
scientia non olet · About LEMON Manuals