LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Cleaning and Inspection >> Crankshaft Out-of-Round, Check

Crankshaft Out-of-Round, Check

WARNING: This page is about a different variant/trim than selected.
  1. Insert the crankshaft in the engine block.
    Fig 1: Dial Gauge Tool
    GM2190919Courtesy of GENERAL MOTORS COMPANY
    NOTE: Crankshaft removed.
  2. Install the GE-571-B  gauge.
    1. Attach to the bracket on the engine block.
    2. Place the dial gauge plunger against the crankshaft bearing journal and adjust.
  3. Check the rotational play of the crankshaft.
    1. Turn the crankshaft evenly.
    2. Maximum permissible rotational play: 0.03 mm (0.001 in).
  4. Remove the GE-571-B  gauge (1).
scientia non olet · About LEMON Manuals