LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Repair Instructions - Off Vehicle >> Camshaft Position Actuator Solenoid Valve Installation

Camshaft Position Actuator Solenoid Valve Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install NEW camshaft position actuator solenoid valve seals (3).
    Fig 1: Camshaft Position Actuator Solenoid Valves, Bolts And Seals
    GM2028075Courtesy of GENERAL MOTORS COMPANY
    NOTE: Lubricate the NEW camshaft position actuator solenoid valve seals with NEW engine oil. Refer to Adhesives, Fluids, Lubricants and Sealers .
  2. Install the camshaft position actuator solenoid valves (2).
  3. Install the camshaft position actuator solenoid valve bolts (1) and tighten to 6 N.m (53 lb in).
    CAUTION: Refer to Fastener Caution .
scientia non olet · About LEMON Manuals