Camshaft Cover Installation
WARNING: This page is about a different variant/trim than selected.
- Clean the bolt and the camshaft cover bolt (4) thread.
- Apply sealant to the camshaft cover bolt (4). Refer to Adhesives, Fluids, Lubricants and Sealers .
- Insert a NEW gasket in the camshaft cover.
- Install the camshaft cover (1).
- Install the 11 bolts (2, 3, 4) and tighten to 8 N.m (71 lb in).CAUTION: Refer to Fastener Caution .