LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LUW And LWE)) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. If necessary, remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (1.8L LUW and LWE) .
  2. Remove the closure bolt (1).
    Fig 1: View Of Closure Bolt
    GM1941819Courtesy of GENERAL MOTORS COMPANY
  3. Clean the thread.