Removal Procedure

WARNING: This page is about a different variant/trim than selected.

WARNING: Refer to Gasoline/Gasoline Vapors Warning .

WARNING: Refer to Safety Goggles and Fuel Warning .

CAUTION: Use care while handling the fuel sender to prevent damage and incorrect fuel level readings.

Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
Disconnect the fuel level sensor assembly wiring harness plugs (1).

Fig 1: Fuel Sender Assembly
Courtesy of GENERAL MOTORS COMPANY
Unclip the 2 fuel level sensor retainer pins.
Remove the fuel level sensor assembly (2).