LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions) >> Repair Instructions >> Exhaust Gas Recirculation Valve Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the exhaust gas recirculation valve actuator (1) to the bracket (2).
    Fig 1: Exhaust Gas Recirculation Valve Actuator
    GM2191117Courtesy of GENERAL MOTORS COMPANY
  2. Install the depression tube (1) to the exhaust gas recirculation valve actuator (2).
    Fig 2: Depression Tube And Exhaust Gas Recirculation Valve Actuator
    GM2191112Courtesy of GENERAL MOTORS COMPANY
  3. Clip in the exhaust gas recirculation valve actuator lever (3) to the exhaust gas recirculation valve cooler lever (4).
  4. Clip in the engine control module bracket including the engine control module.
  5. Close the hood.
scientia non olet · About LEMON Manuals