LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions) >> Repair Instructions >> Emission Reduction Fluid Pump Module Wiring Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Position the emission reduction fluid pump module wiring harness (2).
    Fig 1: Emission Reduction Fluid Pump Module Wiring Harness Plug And Body Wiring Harness
    GM3216250Courtesy of GENERAL MOTORS COMPANY
  2. Connect the emission reduction fluid pump module wiring harness plug (1) to the body wiring harness.
  3. Connect the 6 emission reduction fluid pump module wiring harness plugs.
  4. Install 4 NEW cable ties.
  5. Install the emission reduction fluid tank insulator - upper. Refer to Emission Reduction Fluid Tank Insulator Replacement - Upper .
scientia non olet · About LEMON Manuals