LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - DTC P2122 To DTC P2689 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Fuel Pump Electrical Circuit Diagnosis >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The engine control module (ECM) provides ignition voltage to the coil side of the fuel pump relay whenever the engine is cranking or running. The ECM enables the fuel pump relay as long as the engine is cranking or running and crankshaft position sensor reference pulses are received. If no crankshaft position sensor reference pulses are received, the control module turns OFF the fuel pump.