Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
- Verify that no additional DTCs are set.
- If additional DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If additional DTC is not set
- If additional DTC is set
- Review the Freeze Frame/Failure Records data to verify if Engine Speed exceeded 5400 RPM.
- If the Engine Speed exceeded 5400 RPM
Inspect the engine for the following:
- Aftermarket power-up devices
- Modified fuel system
- Contaminated engine oil
- Un-metered fuel source
- If the Engine Speed did not exceed 5400 RPM.
- If the Engine Speed exceeded 5400 RPM
- Replace the K20 Engine Control Module.