Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
DTC P24B3 and P24B6
- DTC U02A3 is not set.
- Battery voltage is greater than 11 V for at least 3 s.
- Ignition is On for greater than 3 s.
- Particulate Matter Sensor Status is Ready or Not Ready.
- The DTCs run continuously when the above conditions are met.
DTC P24B4
- DTC P0101, P0102, P0103 P0107, P0108, P0401, P0402, P0405, P0406, P0545, P0546, P2080, P2084, P242B, P242C, P242D, P1472 or U02A3 is not set.
- Battery voltage is greater than 11 V for at least 3 s.
- Particulate matter sensor temperature is between 190-210°C (374-410°F).
- Particulate Matter Sensor Status is Ready.
- The DTCs run continuously when the above conditions are met.
DTC P24B7
- DTC P24D0 or U02A3 is not set.
- Battery voltage is greater than 11 V for at least 3 s.
- Particulate matter sensor temperature is between -30 to +150°C (-22 to +302°F).
- The DTCs run continuously when the above conditions are met.