LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Controls And Fuel - 1.8L (LUW, LWE) - DTC P0443 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P069E: Fuel Pump Control Module >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The chassis control module, sometimes called the fuel pump control module, constantly monitors the fuel pump control system for any condition which may adversely affect vehicle emissions. If a condition is detected, the chassis control module sets a DTC and sends a serial data message to the engine control module (ECM). The ECM sets DTC P069E to inform the technician that the chassis control module has set the emission related DTC. The serial data message sent by the chassis control module also contains a request for the ECM to illuminate the malfunction indicator lamp (MIL).

The technician can observe the DTC that was set by the chassis control module by reviewing the ECM Freeze Frame records on the scan tool. The ECM Freeze Frame records also contain the engine operating conditions present when the chassis control module DTC set.

scientia non olet · About LEMON Manuals