Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P12B0, P12B1, P2008, P2009 or P2010 is not set.
- The engine is running.
- The battery voltage is greater than 11 V.
- The DTC runs continuously when the above conditions are met for greater than 5 s.
OR
- DTC P12B0, P12B1, P2008, P2009 or P2010 is not set.
- The engine is OFF for greater than 5 s.
- The engine is in after-run.
- The battery voltage is greater than 11 V.