Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON.
- Verify DTC P02E2, P02E3, P02EB, P0697, P122C, P122E or P122F is not set.
- If any of the DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If none of the DTCs are set
- If any of the DTCs are set
- Verify the Intake Air Flow Valve Position parameter and the Intake Air Flow Valve Desired Position parameter are within 10% when commanding the Intake Air Flow Valve Motor between 0-100% with a scan tool.
- If not within 10%
Refer to Circuit/System Testing
- If within 10%
- If not within 10%
- All OK.