Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
P1043 and P1044
- No other DTCs are present.
- Battery voltage is greater than 11 V for at least 3 s.
- Engine speed is greater than 600 RPM for at least 10 s.
- The DTCs run continuously when the above conditions are met.
P208A
- No other DTCs are present.
- Battery voltage is greater than 11 V for at least 3 s.
- Engine speed is greater than 600 RPM for at least 10 s.
- The reductant tank is not in Frozen Tank Status.
- The ambient air temperature and reductant tank temperature is greater than -7°C (19°F).
- The DTCs run continuously when the above conditions are met.
P208D
- No other DTCs are present.
- Battery voltage is greater than 11 V for at least 3 s.
- Engine speed is greater than 600 RPM for at least 10 s.
- The DTCs run continuously when the above conditions are met.