Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition On.
- Verify DTCs P0101, P0102, P0103, P0112, P0113, P0117, P0118, P011B, P0234, P0299, P0545, P0546, P1400, P2032, P2033, P20E2, P2199 or P2463 are not set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no DTC is set
- If a DTC is set
- Engine running, observe the DTC information with a scan tool. DTC P0420 should not be set.
- If the DTC is set
Refer to Circuit/System Testing.
- If the DTC is not set
- If the DTC is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.