Conditions for Running the DTC

• DTCs P0117 or P0118 is not set.
• The Crankshaft Position Reluctor Wheel Learn procedure has been successfully completed.
• The ECT is warmer than 40°C (104°F).
• The engine is running for more than 10 s.
• The engine speed is between 400-1, 300 RPM.
• The vehicle speed is less than 3 kph (1.8 mph).
• The Base Injector Fuel Rate is between 6.0 mm³ and 75 mm³ .
• The fuel level is above 15%.

The DTCs run continuously when the above conditions are met.