Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P02E0
- Ignition is OFF.
- Engine is in after-run.
- Battery voltage is greater than 11 V.
- Intake air flow valve motor control circuit is active.
- The DTC runs continuously whenever the above conditions are met.
P02E2, P02E3, P02EB, P122C, P122E and P122F
- Battery voltage is greater than 11 V.
- Engine is running.
- Intake air flow valve motor control circuit is active.
- The DTCs run continuously whenever the above conditions are met.