Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
Charge Air Cooler Temperature Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON or Engine Running Parameter Normal Range: -39 to +198°C (-38 to +388°F) |
|||
| Signal | 199°C (390°F) | -40°C (-40°F) | -40°C (-40°F)* |
| Low Reference | - | -40°C (-40°F) | -40°C (-40°F)* |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+. | |||
IAT Sensor 1
| Circuit | Short to Ground | Open or High Resistance | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine Running Parameter Normal Range: Varies with ambient humidity and temperature; and engine bay conditions |
|||
| Signal | 130°C (266°F) | -40°C (-40°°F) | -40°C (-40°F)* |
| Low Reference | - | -40°C (-40°°F) | -40°C (-40°F)* |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+. | |||
IAT Sensor 3
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON or Engine Running Parameter Normal Range: Varies with ambient temperature; and engine bay conditions |
|||
| Signal | 215°C (419°F) | -40°C (-40°F) | -40°C (-40°F)* |
| Low Reference | - | -40°C (-40°F) | -40°C (-40°F)* |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+. | |||