Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

Engine speed is greater than 600 to 850 RPM, depending on engine coolant temperature (ECT) and BARO, for at least 10 s.
The ECT is between 70-123°C (158-253°F).
The Ambient Air Temperature is warmer than -7°C (+19.4°F).
The difference between the CAC Inlet Temperature and the Ambient Air Temperature is at least 40°C (72°F).
The Intake Air Flow (IAF) Valve Position is 5% or less.
The MAF signal is between 83.33-152.77 g/s.
The vehicle speed is at least 60 Km/h (37 mph).
The BARO is greater than 75 kPa (10.8 PSI).
The calculated fuel rate is between 10 mm³ and 70 mm³ .
This DTC runs once per key cycle when the above conditions exist.