Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0047, P0048, P007C, P007D, P0102, P0107, P0108, P0117, P0118, P02E8, P02E9, P02EB, P0641, P0651, P0697, P140F, P2009, P2010, P2228, P2229, P2263, P2564, P2565, P2598 or P2599 is not set.
- Engine speed is between 2, 000-3, 500 RPM for greater than 10 s.
- Ambient air temperature is greater than -7°C (19.4°F).
- Barometric Pressure (BARO) is greater than 74.8 kPa.
- Turbocharger offset learn is not active.
- Turbocharger wiping function is not active.
- Fuel injection quantity is between 100-150 mm3 .
- Turbocharger control deviation is between -10 and +10%
- Commanded turbocharger position is less than 75%. (P0234 only).
- Diesel Particulate Filter (DPF) regeneration is not active.
- The DTCs run continuously when the above conditions are met.