LEMON Manuals
: Even more car manuals for everyone
Home
>>
Chevrolet
>>
2015
>>
Cruze LT, Automatic Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 11 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - DTC P0016 To DTC P0406)
>>
Diagnostic Information and Procedures
>>
DTC P0191: Fuel Rail Pressure Sensor
>>
Conditions for Setting the DTC
>>
Post Drive Mode
Post Drive Mode
WARNING:
This page is about a different variant/trim than selected.
When the ignition is off and the fuel rail pressure sensor voltage is not between 0.42 V and 0.61 V.
The fault condition exists for more than 0.30 s.