Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0131

The engine control module detects that the heated oxygen sensor voltage is less than 0.9 V for more than 2 s.

P0132

The engine control module detects that the heated oxygen sensor voltage is greater than 7.50 V for more than 2 s.

P0133

The engine control module detects that the expected rise in O2 concentration is greater than 3 s or the time from 30% to 60% is greater than 1.8 s.

P11A6

The engine control module detects that the difference between the calculated value of O2 concentration and the HO2S signal output is greater than 0.04 and 0.07 for 0.1 s.

P11A9

The engine control module detects that the difference between the calculated value of O2 concentration and the HO2S signal output is less than 0.06 and 0.07 for 0.1 s.

P2237

The ECM detects the measured O2 concentration is less than 0.01 for more than 2 s.

P2243

The ECM detects the measured O2 concentration is greater than 3.22 V or less than -1.3 V for more than 2 s.

P2251

The ECM detects the measured O2 concentration is between -0.2 V and 0.2 V for more than 2 s.