Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
NOTE:
The scan tool display range is between -40 and +215°C (-40 and +419°F).
P00EA
The IAT sensor 3 is warmer than 250°C (482°F) for longer than 5 s. This is equal to or less than 0.05 V on the IAT sensor 3 signal circuit as measured by the engine control module.
P00EB
The IAT sensor 3 is colder than -50°C (-58°F) for longer than 5 s. This is equal to or greater than 4.94 V on the IAT sensor 3 signal circuit as measured by the engine control module.