Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0340 or P0365 Condition 1
The ECM does not detect a camshaft position sensor pulse for greater than 5.5 s or greater than 4.0 s since the time the starter has been engaged.
Condition 2
The ECM detects less than 4 camshaft position sensor pulses for greater than 3.0 s.
Condition 3
The ECM does not detect a camshaft position sensor pulse during the first 2 engine revolutions.
Condition 4
The ECM does not detect a camshaft position sensor pulse during 200 engine revolutions.
P0341 or P0366 Condition 1
The ECM detects less than 4 or greater than 6 camshaft position sensor pulses during the first 2 engine revolutions.
Condition 2
The ECM detects less than 398 or greater than 402 camshaft position sensor pulses during 200 engine revolutions.