Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
P0324 or P0326
- Engine speed is between 400 and 8, 500 RPM.
- Engine is running for greater than 2 s.
- The engine coolant temperature (ECT) is warmer than -40°C (-40°F).
- The intake air temperature (IAT) sensor 1 is warmer than -40°C (-40°F).
AND
- Engine speed is 400 RPM or greater for 200 or more cumulative revolutions.
OR
- Engine speed is 8, 500 RPM or greater.
P06B6
- Engine speed is between 500 and 5, 500 RPM for 100 or more cumulative revolutions.
- Engine is running for greater than 2 s.
The DTCs run continuously when the above conditions are met.