Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P0131 or P0137
- DTCs P0068, P0106, P0108, P0122, P0123, P0201, P0202, P0203, P0204, P0222, P0223, P0442, P0443, P0449, P0452, P0455, P0496, P0606, P16F3 and P2101 are not set.
- The Ignition voltage is between 10-32 V.
- The fuel level is greater than 10%.
- The fuel composition is less than 87% ethanol.
- The fuel system is in Closed Loop.
- The engine is not decelerating.
- DTC P0131 runs continuously when the above conditions are met for greater than 3 s.
- DTC P0137 runs continuously when the above conditions are met for greater than 5 s.
DTC P0132 or P0138
- DTCs P0106, P0108, P0201, P0202, P0203, P0204, P0442, P0443, P0449, P0452, P0453, P0455 and P0496 are not set.
- The Ignition voltage is between 10-32 V.
- The fuel level is greater than 10%.
- The fuel composition is less than 87% ethanol.
- The fuel system is in Closed Loop.
- The engine runtime is greater than 60 s.
- The engine is not decelerating.
- DTC P0132 and P0138 run continuously when the above conditions are met for greater than 3 s.