LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 1.8L (LUW, LWE) - DTC P0010 To DTC P0442) >> Diagnostic Information and Procedures >> DTC P0112, P0113 or P0114: Intake Air Temperature (IAT) Sensor 1 Circuit >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.
NOTE: The scan tool display range is between -40 and +150°C (-40 and +302°F).

P0112 

The ECM detects that the IAT sensor signal is warmer than 150°C (302°F) for at least 5 s.

P0113 

The ECM detects that the IAT sensor signal is colder than -60°C (-76°F) for at least 5 s.

P0114 

The ECM monitors the IAT sensor signal every 0.1 s, to determine if the signal has changed more than 80°C (176°F). The DTC fails when the condition exists for longer than 4 s.